Product Introduction
The Helmet Ballistic Visor is a modular accessory for ballistic helmets, installed via an ARC side rail bracket and can be flipped up for locking. It provides protection for the face and eyes against pistol bullets and shrapnel, using Kevlar fibers, ultra-high molecular weight polyethylene, polycarbonate (PC) + polyurethane (PU) laminated composite structure, with a thickness of 20mm; it has a scratch-resistant and anti-fog coating, with a light transmittance of over 80%. The weight ranges from 0.4kg to 1.46kg, and the protective area is approximately 0.045-0.055 square meters. The vast majority of external ballistic face shields sold on the market are of NIJ IIIA grade.
By coverage type: it is divided into adjustable type, half-face full coverage type, and full mask type, suitable for different tactical scenarios and vision and protection requirements.
|
By coverage type |
it is divided into adjustable type, half-face full coverage type, and full mask type, suitable for different tactical scenarios and vision and protection requirements. |
|
By core material |
it includes Kevlar fibers, ultra-high molecular weight polyethylene (PE), ballistic composite glass, polycarbonate (PC)/polyurethane (PU), etc., as mainstream types. |
|
By protection level |
mainstream compliant models reach NIJ IIIA. |
|
Weight range |
the weight of regular products is between 0.4kg and 1.49kg. Lightweight PE material models can be as low as 600g, and they are not prone to causing pressure sores when worn for a long time. |
|
Protection area |
approximately 0.045㎡ to 0.055㎡, balancing protection range and tactical flexibility. |
|
Light transmission performance |
high-quality models have a light transmittance of 81.2% to 84.8%, without affecting normal observation and tactical operations. |
|
Operating temperature range |
it can be used stably in extreme environments of -45℃ to +55℃, suitable for complex scenarios such as deserts and high altitudes. |
|
Installation method |
loosen the lock buckle at the rear of the visor, hang the side hooks on the corresponding positions of the ballistic helmet, adjust the tightness, and then lock to complete the fixation. |
|
Wearing compatibility |
fine-framed or frameless glasses can be worn normally, the internal closed-cell foam cushion can buffer impact and absorb sweat, and there is no obvious discomfort when worn for a long time. |
|
Safety prohibitions |
after the visor is hit by a bullet or a high-speed object, regardless of whether it is penetrated or not, it is strictly prohibited to use it again to avoid the failure of secondary protection. |
Hot Tags: helmet ballistic visor, China helmet ballistic visor manufacturers, suppliers, factory
